Bring the two duct systems together.
The 150mm main connection links the main ventilation route with two compatible BlauFast semi-rigid branches. Check the main joint arrangement before assembly.
Recent
Clear
Connect a 150mm main ventilation duct to two BlauFast semi-rigid branches with a BlauTHERM twin adaptor. Choose the branch size in the diameter selector: 75mm for two 75mm outlets or 90mm for two 90mm outlets. Both versions keep a 150mm main connection.
BlauTHERM
Link a 150mm main duct connection to two BlauFast semi-rigid branches with a BlauTHERM twin adaptor. Choose two 75mm or two 90mm outlets to suit the branch ducting, bringing the systems together at one planned connection point.

Make the twin BlauFast branch adaptor part of a complete, planned installation.
The 150mm main connection links the main ventilation route with two compatible BlauFast semi-rigid branches. Check the main joint arrangement before assembly.
Select two 75mm outlets or two 90mm outlets to suit the planned branches. Use the matching BlauFast sealing and retaining accessories for the selected duct.
Match the main duct and actual joint arrangement.
Connect two branches of the selected semi-rigid size.
Choose the outlet size used by the planned room routes.
Coordinate the main connection with the insulated duct system.
Leave room to assemble, secure and inspect both outlets.
Check and balance both connected branches during commissioning.
Choose the twin BlauFast branch adaptor for the route and connection arrangement specified for your installation.

Connect the 150mm main arrangement to two matching BlauFast branches of the selected size.
Plan the two semi-rigid branches against their required airflow and the space available for connection.
Secure and support both branch joints, then check and balance the connected system.
Use the diameter selector to choose the branch outlet size: 75mm means two 75mm outlets; 90mm means two 90mm outlets. Both options have a 150mm main connection.
Available option
Twin BlauFast branch adaptor
BTA-150-75
Available option
Twin BlauFast branch adaptor
BTA-150-90
Both adaptor options have a 150mm main connection. The selected option changes the two branch outlets to either 75mm or 90mm.
Check the 150mm main connection and the selected BlauFast outlet size before assembly.

The main is 150mm. Select two 75mm or two 90mm outlets to match the semi-rigid branch ducting.
Dry-position the adaptor so the main and branch connections can be assembled and inspected.
Fit the BlauFast sealing and retaining accessories required for the selected branch duct and connection. Check the supplied instructions.
Fully assemble and support the connected routes, then check both branch airflows during commissioning.
Check these details alongside the route design, actual components and fitting instructions.
Both twin adaptor options have a 150mm main connection. Check the mating arrangement with the actual main duct.
The selector refers to the two branch outlets. Choose 75mm for two 75mm branches or 90mm for two 90mm branches. Both adaptor options have a 150mm main connection.
Each option has two outlets of the same selected size: 2×75mm or 2×90mm.
The outlets are intended for compatible BlauFast semi-rigid branches. Use the sealing and retaining accessories specified for the selected duct.
Check the 150mm main connection and the required branch size. Both are needed to choose and assemble the correct connection.
Leave room to assemble, secure and inspect both outlets before the surrounding construction is closed.
Actual branch flows depend on the connected system. Plan and commission both routes to the required airflow duties.
The connected photo illustrates the assembly. Check the listed item and order the required branch ducting and matching accessories separately unless expressly included.