Coordinate the services before they meet.
Plan the adaptor alongside the building structure, pipework, cables and other duct routes. Check the full footprint before the surrounding work is closed in.
Recent
Clear
Choose the matching option for your route. Coordinate ventilation ducting with beams and nearby services using a BlauTHERM insulated beam adaptor. Its shaped EPP body links matching circular connections while helping the installer plan the route within the available space.
BlauTHERM
Coordinate ventilation ducting with beams and nearby services using a BlauTHERM insulated beam adaptor. Its shaped EPP body links matching circular connections while helping the installer plan the route within the available space.

Make the insulated beam adaptor part of a complete, planned installation.
Plan the adaptor alongside the building structure, pipework, cables and other duct routes. Check the full footprint before the surrounding work is closed in.
The EPP adaptor connects matching circular ductwork. Select the nominal size for the adjoining route and check assembly space at both ends.
A dedicated adaptor for coordinating around beams and services.
Continue the matching insulated air path through the fitting.
Choose the nominal size required by the adjoining ductwork.
125mm, 160mm and 200mm options.
Dry-position the full adaptor before measuring adjacent lengths.
Check access, assembly clearance and suitable support positions.
Choose the insulated beam adaptor for the route and connection arrangement specified for your installation.

Plan this insulated beam adaptor alongside the main duct layout, equipment connections and commissioning requirements.
Select the fitting or support for the designed conditioned-air route, checking the connections and available installation space.
Coordinate the component with a suitable extract route and provide the support, sealing and access needed for the finished installation.
Choose the option that matches the connected components and route design.
Available option
Insulated beam adaptor
BTIDBA-125
Available option
Insulated beam adaptor
BTIDBA-160
Available option
Insulated beam adaptor
BTIDBA-200
Check the actual clearance and connection arrangement. The adaptor does not provide approval to cut, drill or modify structural beams.
Coordinate the actual adaptor shape with the structure and the adjoining services.

Choose the nominal duct size and check the full adaptor footprint and connection positions.
Place the adaptor alongside the adjoining lengths and nearby services before completing the route.
Clean and fully seat compatible push-fit connections. Use BTG-500 EPP adhesive where added joint rigidity is required.
Provide suitable support and maintain any servicing access needed around the completed installation.
Check these details alongside the route design, actual components and fitting instructions.
It is a shaped fitting for coordinating a matching circular duct route around the building structure and surrounding services.
Match the nominal 125mm, 160mm or 200mm size to the adjoining BlauTHERM ductwork.
Check the actual adaptor footprint, connection positions and available clearance against the supplied dimensional information and installation.
The adaptor is a duct-route component. Any structural alteration requires its own approved design; this fitting does not authorise cutting or drilling beams.
Its EPP body forms part of the matching insulated ducting range. Fully assemble the joints and maintain the required sealing and insulation.
Measure the actual route and allow for joint engagement before cutting square, clean lengths. Plan the matching connectors required for the joints.
Dry-position it with the adjoining lengths and other services before completing the joints or closing surrounding construction.
Fully seat clean matching joints, add BTG-500 EPP adhesive where extra strength and rigidity are required and support the completed ductwork suitably.