Covid19 Update
Click and Collect in 1 hour
Same Day Dispatch
Get a Trade Account
Blauberg Points
Receive 100 BLAUPoints for sharing and 200 BLAUPoints for reviewing
Login or create an account to earn BLAUPoints.

Commercial Heat Recovery Ventilation Unit MVHR Horizontal Thermal Wheel High Efficiency Low SFP

Order before 3pm for next-day UK delivery.
SKU
BLAUAIR-RH-CON
As low as £5,466.87 £4,555.72
 In stock
Reward Points Earning from 91114 BLAUPoints for this item
Applies only to registered customers, may vary when logged in.

Model Features:


  • Horizontally mounting supply & extract heat recovery unit.
  • Airflow rates from 1500 to 6000 m3/hour (416 to 1666 l/s).
  • Electric & water heater options with plug & Play controls built-in.
  • Fitted with German Blauberg low energy EC motors.
  • ERP 2018 compliant and A+ energy rated.
  • Highly efficient thermal wheel for maximum heat recovery.

Use this Blauberg BIM object in your project:



  • Horizontally mounting supply & extract heat recovery unit.
  • Airflow rates from 1500 to 3500 m3/hour (416 to 972 l/s).
  • Electric & water heater options with plug & Play controls built-in.
  • Fitted with German Blauberg low energy EC motors.
  • ERP 2018 compliant and A+ energy rated.
  • Highly efficient thermal wheel for maximum heat recovery.

Blauair RH Heat Recovery Unit



Heat Recovery Exchanger

  • Heat exhanger Counterflow aluminum plate heat exchanger.
  • Eurovent certified heat recovery efficiency.
  • Removable drain pans on both supply and extract.
  • Automatic full-size summer by-pass.

Supply & Extraxct Fans

  • Supplied with German EC fans.
  • Backward curved impeller.
  • Phase/voltage [50/60Hz/VAC] ~1, 200/277.
  • Insulation class B.
  • Motor protection class IP 54.

Unit Casing

  • Double skin frameless casing with 40 mm mineral wool 90 kg/m3; non-flammable; outer skin: zinc-aluminum; inner skin: zincaluminum;
  • Manufactured to EN1886 class: D1, T2, TB2; corrosion resistance according to ISO 12944: class C4.
  • Insulation class B.
  • 16mm condensation drainage pipe connection.

Filtration

  • F7 Grade - A high grade synthetic air filter down to PM2.5 (Particulate Matter), pollen,& mould spores, fungi, bacteria and viruses.
  • Filters are manufactured to class (EN779) F7, Frames 196x384x40, panel type, PP+PET.
  • Original Blauberg filters to maximise the efficiency of your heat recovery unit.
  • Long life double pleated filter cassettes for better value for money.


Controls

Control system features advanced functions that can be activated based on the devices installed on the air handling unit:

  • Coils management: water heater, water cooler, direct expansion, cooler/heater coil;
  • Fans management: 3 speed setup, air pressure control, airflow control.
  • Heat recovery.
  • Temperature and/or humidity control.
  • Automatic summer/winter (cooling/heating) changeover.
  • Operation in comfort, pre-comfort or economy mode.
  • Selection of up to four daily time bands, with settings for each operating modes.
  • Holiday and special day function, with reduced set point.
  • Air quality control with optional CO2/IAQ probe.
  • Priority to temperature or humidity control, by room/supply/extract sensors.
  • Safety protectors for antifreeze, dirty filters, smoke/fire, no air or water low, inverter alarm.
  • Parameter settings divided by level, user, installer or manufacturer, with password-protected access.
  • Manual functioning mode.
  • Supervisor protocol: Modbus slave build-in, Bacnet built-in.
  • Free cooling and free heating.
  • Pump management, overload alarms and anti-blocking for each pump.
  • WEB-interface via integrated Ethernet port.
CONTROL AND AUTOMATION

The BlauAir S21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System). The unit can be controlled by the Blauberg AHU mobile application via Wi-Fi.

Download the Blauberg AHU app for Android

Download the Blauberg AHU app for iOS

 
Functions  
Unit control via Wi-Fi using a mobile application +
Unit control via a wired remote control panel S22 control panel (option)
Unit control via a wireless remote control panel S22 Wi-Fi control panel (option)
Unit control via a remote wired LCD control panel S25 control panel (option)
BMS (Building Management System) RS-485
Wi-Fi
Ethernet
MODBUS (RTU, TCP)
Blauberg Cloud Server service +
Speed selection +
Filter replacement indication by filter timer
by filter clogging differential pressure switch
Week-scheduled operation +
Bypass automatic
manual
Timer +
Boost mode +
Fireplace mode +
Freeze protection through cyclic stops of the supply fan
through preheating (option)
Reheater connection option
Cooler connection option
Minimum supply air temperature control +
Humidity control option
CO₂ control option
VOC control option
PM2.5 control option
Fire alarm sensor connection option
Technical details
ManufacturerBlauair
Impeller TypeCentrifugal
Motor TypeEC
Electrical Supply1 Phase 220/250 50/60Hz
Energy RatingERP 2018
Tax ClassTaxable Goods

You might also like to use this Blauberg BIM objects in your project:


Blauair RH Heat Recovery Unit
Commercial Heat Recovery Ventilation Unit MVHR Horizontal Thermal Wheel High Efficiency Low SFP