Blauberg S21 Plug-In Frost Protection Electric Pre-Heater Battery - 200mm dia, 1.7 kw
- Electric plug-in heater battery specifically designed to work with Blauberg heat recovery units.
- 200mm circular duct connection sizes.
- 1.7 Kw thyristor controlled electric pre-heater battery.
- Supplied with power cable & 2.5m control cable to heat recovery unit.
Heat exchanger freeze protection by means of preheating of the intake air. Maintains the duct air temperature at a point that prevents the heat exchanger freezing. Compatible with Ø 200 mm air ducts.
Equipped with a power cable. The signal cable for connection to the controller of the air handling unit. Equipped with thyristor control from the heat recovery unit. Regulation is carried out via switching-on and switching-off the full load. Load commutation is carried out by the semiconductor device (triac). The switching unit has no wearing mechanical elements. Equipped with overheat thermostats: main protection with automatic restart at +50 °С; emergency protection with manual restart at +90 °С.
The casing is internally filled with 20 mm layer of non-flammable mineral wool. The casing and the junction box are made of galvanized steel. Heating elements are made of stainless steel. Airtight connection to air ducts due to rubber seals.
Fixation to round air ducts by means of clamps (included in the delivery). In case of horizontal mounting position the control box cover must be directed upwards only. Permitted deviation up to 90°. The control box cover may not be positioned downwards!
|Please choose Size||200mm Dia|
|Duct Connection Size||200mm Dia|
|Tax Class||Taxable Goods|