Schedule a call back
Covid19 Update
Click and Collect in 1 hour
Same Day Dispatch
Get a Trade Account

Komfort Horizontally Mounted Slimline Mechanical Ventilation Unit with Heat Recovery - Electric Heater - Built-in Controls - Komfort-EC-DBE-CON

Order before 3pm for next-day UK delivery.
As low as £3,983.76 £3,319.80
 In stock

Model Features:

  • Low profile range of slimline ceiling/void mounting MVHR units.
  • Supply & extract airflow rate up to 1111 l/s (4000 m3/hour).
  • Fitted with German Blauberg low energy EC motors.
  • Supplied with built-in electric heater battery.
  • Full plug & play controls provided.
  • Available for left (standard) and right installation.

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings. For controllable mechanical energy saving ventilation systems. Heat recovery minimises ventilation heat losses. Control of air exchange for creating comfortable indoor microclimate. Compatible with round Ø 160, 200, 250, 315, 400 mm air ducts.


The casing is made of double-skinned aluzinc panels, internally filled with 20 mm mineral wool layer for heat and sound insulation. The casing has fixing brackets with vibration absorbing connectors for easy installation. The spigots for connection to the air ducts are located at the side of the unit and are rubber sealed for airtight connection to the air ducts. The service panel ensures easy access to the internals for cleaning, filter replacement and other maintenance operations.



High-efficient external rotor EC motors and centrifugal impellers with backward curved blades are used for air supply and exhaust. EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation. EC motors are featured with high performance, low noise level and totally controllable speed range. Dynamically balanced impellers.

KOMFORT EC DBE... 300/550/900

The KOMFORT EC DBE 300/550/900 unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The drain pan located under the heat exchanger is designed for condensate collection and drainage.

The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air. Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively. In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.


The unit is equipped with an electric heater for operation during cold seasons at low outside temperature. The integrated electric heater is activated to warm up supply air flow if set indoor air temperature may not be reached by means of heat recovery only. Smooth heat output control ensures automatic supply air temperature maintaining. Two integrated overheat protection thermostats, one actuated at +60 °C with automatic restart and the other one actuated at +90 °C with manual restart.


The units are equipped with a bypass for summer ventilation (room cooling by cool air from outside) and heat exchanger freeze protection.


The built-in G4 supply filter and G4 extract filter provide air filtration. The F7 supply filter (specially ordered accessory) may be used for efficient supply air filtration.


Ceiling mounting with fixing brackets. The correct mounted unit must provide free condensate collection and drainage as well as good access for servicing and filter replacement. Access for servicing and cleaning the filter: from the right or left side panel, depending on the unit modification.


The units are equipped with an S21 integrated automation system. The remote control panel is not included in the delivery set (available separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System). The unit can be controlled by the Blauberg AHU mobile application via Wi-Fi.

the Blauberg AHU
app for Android

the Blauberg AHU
app for iOS

Functions Description
Unit control via Wi-Fi using a mobile application +
Unit control via a wireless remote control panel
S22 Wi-Fi control panel (option)
Unit control via a wired remote LCD control panel
S25 control panel (option)
BMS (Building Management System) RS-485
Blauberg Cloud Server service +
Speed selection +
Filter replacement indication by filter timer
by filter clogging differential pressure switch (only units with DTV)
Alarm indication full alarm description in the mobile application
Week-scheduled operation +
Bypass automatic
Timer +
Boost mode +
Fireplace mode +
Freeze protection through cyclic stops of the supply fan
through preheating (option)
Cooler connection option
Minimum supply air temperature control +
Humidity control option
CO2 control option
VOC control option
PM2.5 control option
Fire alarm sensor connection option

option: function is available when purchasing the appropriate accessory (see the "Accessories" tab).
Technical details
Motor TypeEC
Electrical Supply1 Phase 220/250 50/60Hz
Energy RatingERP 2018
Tax ClassTaxable Goods

You might also like to use this Blauberg BIM objects in your project:

Komfort Horizontally Mounted Slimline Mechanical Ventilation Unit with Heat Recovery - Electric Heater - Built-in Controls - Komfort-EC-DBE-CON