Vento Maxi-Air Decentralised Single Room Heat Recovery Unit - WiFi
Model Features:
- Vento Maxi-Air is a highly efficient Single Room Heat Recovery Unit.
- Effective single room humidity, mold, condensation and co2 control.
- Units can be connected via WiFi to other units to provide a whole house MVHR solution.
- Positive input, continual extract, trickle, boost and purge ventilation options.
- Part of the Blauberg Mini-Air, Midi-Air, Mini-Air & Duo-Air range of room heat recovery ventilators.
Use this Blauberg BIM object in your project:
OBJECTS INCLUDED:
- VENTO MAXI
Frequently bought together
Blauberg Vento ventilators are a highly versatile range of wall mounted heat recovery units. Vento ventilation units can operate individually as single room heat recovery units or collectively, via WiFi communication to provide a whole house ventilation solution. In addition, Vento units can also operate as intermittent extractor fans, positive input ventilation units or continually operating, decentralised mechanical extract ventilators.
The four different Vento models; Maxi, Midi, Mini & Duo are specifically designed for different rooms in your house and sized in relation to their respective airflow, humidity and noise levels requirements. Blauberg Vento units will provide a localised damp, humidity and condensation solution while achieving sufficient levels of ventilation automatically. Up to 93% of heat can be recovered that would normally be wasted when traditional extractor fans are used.
Vento Maxi-Air Units working with other Vento Mini, Midi & Duo-Air to provide a whole house, de-centralised heat recovery ventilation solution
| FEATURES |  |
||||||||
|
Arrangement of efficient energy-saving, supply and exhaust, single-room ventilation in flats, houses, cottages, social and commercial premises.
Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and controllable air exchange create individually controlled microclimate.Wi-Fi data exchange between several single-room ventilation units for coordinated operation.Controlled by Android or iOS smartphone or tablet. Connection to smart house or Building Management System (BMS).
|
|||||||||
| DESIGN | |||||||||
|
|
|||||||||
|
|||||||||
| ENERGY RECOVERY | |||||||||
|
UNIT OPERATING LOGIC IN WINTER PERIOD |
|||||||||
 |
|||||||||
| Warm stale air is extracted from the premise, flows through the ceramic heat exchanger and transfers its heat and moisture to it.As the ceramic heat exchanger gets warmed up, the unit switches to the supply mode. | Clean cold intake air flows through the heat exchanger and absorbs accumulated heat and humidity.When the heat exchanger is cooled down, the unit switches to the extract air mode. | ||||||||
| CONTROL | |||||||||
|
Unit control via smartphone or tablet application.
The units can be connected by Wi-Fi for synchronized operation.
House ventilation control via cloud service from anywhere in the world.
Connection to smart house or Building Management System (BMS) via Wi-Fi.
|
Blauberg Vento V.2 app for Android or iOS devices is available at Google Play and App Store.
|
||||||||
 |
|||||||||
| Vento Expert A100-1 S10 W V.2 either can operate as independent unit or can be connected with other units in a house and controlled with a master unit. In this case, only the master unit receives a signal from the remote control. | Control of the unit operation mode is also performed by means of the sensor control panel located on the unit casing or the remote control. | ||||||||
|
|
Vento Expert A100-1 S10 W V.2 is equipped with a humidity sensor for indoor humidity control. If humidity increases above a set point, the unit boosts to the speed III. |
||||||||
| MOUNTING | |||||||||
| The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.The best ventilation solution is pairwise installation of reverse phase synchronized units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most efficient balanced ventilation is arranged. | The VENTO Expert A100-1 S10 W V.2 unit can also be installed in a bathroom and kitchen, if allowed by local building codes. Otherwise, the Vento Expert Duo unit or an extract fan should be installed. |
||||||||
 |
|||||||||
| Weight | 1.000000 |
|---|---|
| Manufacturer | Blauberg |
| Motor Type | DC |
| Electrical Supply | 1 Phase 220/250 50/60Hz |
| Control Options | Wifi |
| Color | White |
| Energy Rating | ERP 2018 |
| Tax Class | Taxable Goods |
| Delivery Lead Time | Normal |
You might also like to use this Blauberg BIM objects in your project:
