Covid19 Update
Click and Collect in 1 hour
Same Day Dispatch
Get a Trade Account
Blauberg Points
Receive 100 BLAUPoints for sharing and 200 BLAUPoints for reviewing
Login or create an account to earn BLAUPoints.

Blauberg S21 Plug-In Electric Post Heater Battery & Sensor for Heat Recovery Ventilation Units - 200mm dia, 1.7 kw

Order before 3pm for next-day UK delivery.
Only 4 left
SKU
ENH 200-1.7-1-
£155.21 £129.34
In stock
Reward Points Earning 2587 BLAUPoints for this item
Applies only to registered customers, may vary when logged in.
  • Electric plug-in post re-heater specifically designed to work with Blauberg heat recovery units.
  • 200mm circular duct connection sizes.
  • 1.7 Kw thyristor controlled electric post heater battery.
  • Supplied with power cable & 2.5m control cable to heat recovery unit.
  • Pre-wired duct mounted temperature sensor included.

FEATURES

The heater is designed for integration into a ventilation system and joint operation with an air handling unit equipped with a control system used to switch on the heater and control its operation. The heater maintains the supply duct air temperature at a point set by the unit controller.

CONTROL

The ENH duct heaters are equipped with a power and a signal cable for connection of the heater to the air handling unit controller. The temperature is controlled by a triac power controller by means of switching the full load on and off. Load commutation is carried out by the semiconductor device (triac). The heaters are equipped with overheat thermostats: main overheat protection with automatic reset at +50 °С; emergency overheat protection with manual reset at +90 °С.

DESIGN

The casing, the junction box and the heater cover are made of galvanized steel with the heating elements in stainless steel. The heater casing is additionally heat-insulated with 20 mm non-flammable mineral wool layer. The heaters are equipped with rubber seals for airtight connection to the air ducts.

MOUNTING

The heater design ensures its mounting on the round ducts in any position by means of clamps (included in delivery). The air flow direction shall match the direction of the arrow on the heater casing. The heater is connected to the air handling unit controller using the cable with connectors. In case of horizontal mounting the control box must be installed with the cover upwards. Swivel range from the normal position up to max. 90°. Do not install the control box with the cover downwards.

Technical details
Price£155.21
Weight13.000000
ManufacturerKomfort
EAN Number5056194026222
Please choose Size200mm Dia
Duct Connection Size200mm Dia
Tax ClassTaxable Goods
Blauberg S21 Plug-In Electric Post Heater Battery & Sensor for Heat Recovery Ventilation Units - 200mm dia, 1.7 kw